Skip to content
Preview. Prices and texts are drafts, orders are not fulfilled.

Notes / Made yours

The LG washer: what we found when we cut the cloud

17.11.2026 LVENRU

58 °C2,2 kWh1:12Hugo

As sold, our LG washer-dryer can be controlled from a phone in exactly one way: through LG’s servers. If the servers are down or LG changes the terms, the remote control is gone. We wanted to know what the machine can do on its own.

What we did

We moved the machine off LG’s cloud and onto a small open-source program running in our own home. Our model was not on its list, so we added the support ourselves. The machine itself was not opened and not modified.

What we found

  • Real remote control. A wash can be started from a phone or an automation without pressing a single button on the machine.
  • Rinse hold and medic rinse. Neither is on our panel, yet the machine carries them out.
  • 50 °C. The panel offers 40 and 60. We set 50 and measured: the water in the tub warmed to exactly 50 °C.
  • Spin settings above the panel’s maximum. The machine accepts them.
  • Readings LG’s app never shows. Water temperature in the tub, drying air temperature, and a warning when the detergent in the dispenser runs out.

What does not work

The pause command. The machine acknowledges it but does not pause the wash, so the only way to stop is to switch it off. We are still confirming the unit of the energy counter, so we are not publishing those numbers yet.

Safety stays with the machine

When we tried to start drying with the door open, the machine refused and showed its own door error. Its own protections work exactly as before. Remote control also means responsibility: start a wash from afar only when you know the machine is ready for it.