Three tests every smart home should pass
A smart home has to make life easier. That only holds if a failure takes away convenience and never access, light, heat or water. We check it with three tests, run with the owner watching.
1. Unplug the internet
Pull the cable from the router. Every switch, sensor and automation inside the home should keep working, and so should the phone app on home Wi-Fi. Only remote access and messages to the outside may pause.
2. Cut the power
Switch off the mains. You must still be able to get in and out, so every smart lock we fit keeps a working mechanical key. When power returns, everything should start again by itself, with no lost settings and each relay in the state chosen for it.
3. Switch off the hub
Turn off Home Assistant. Lights must still work from the wall switches and heating from its own thermostat. The hub is never the only way to do anything.
Why cloud devices fail the first test
A device that needs its maker’s servers stops being smart the moment the connection drops. A device that works locally does not notice.
The results of the three tests go into the handover document. Try the first one at home tonight. It takes a minute and tells you a lot about what you own.